返回主站|会员中心|保存桌面|手机浏览|二维码
普通会员

沈阳博耐斯阀门制造有限公司

蒸汽阀门,导热油阀门,排污阀,止回阀,闸阀,电动阀门,截止阀,球阀,蝶阀,调...

新闻分类
  • 暂无分类
站内搜索
 
荣誉资质
  • 暂未上传
首页 > 新闻中心 > 疏水阀的选型,自由浮球式蒸汽疏水阀参数,沈阳疏水阀厂家
新闻中心
疏水阀的选型,自由浮球式蒸汽疏水阀参数,沈阳疏水阀厂家
发布时间:2023-07-17        浏览次数:26        返回列表

 博耐斯浮球式蒸汽疏水阀利用高精度研磨不锈钢空心浮球在阀腔内随着凝结水的液位变化开启或关闭阀门。该疏水阀的结构比较简单,主要由浮球和自动排空装置组成。阀腔内的动作元件——不锈钢空心浮球,采用细精度研磨工艺制造,整个球面均可做密封面,工作时无集中磨损,使用寿命长 ; 阀腔内无易损件,稳定性能 好。浮球能根据水位变化而自由调节阀孔的开度,能够连续排放凝结水,过冷度≈0℃,工作效率高。微信:sy1668

自动排空装置分为两种 :(低压PN25以内)液囊热敏元件组成和(过热蒸汽系统)双金属片组成。

Free-ball float trap

The drain valve is opened or closed by taking advantage of the change of liquid level of condensate water with the high-precision grinding stainless steel hollow float ball in the valve cavity. This steam trap has a simple structure, mainly consisting of float balls and automatic emptying devices. The sole action elements, namely, the stainless steel hollow float ball is manufactured by high-precision grinding process, and its entire sphere can serve as the sealing face and will not be worn intensively during the work, so it has a longer service life. In addition, there is no wearing part in the valve cavity, with a high reliability. The float ball can freely adjust the openness of the valve opening in response to the change of water level and discharge the condensate water continuously with a subcooled temperature of about 0℃ and higher efficiency.
The automatic emptying devices fall into two types : (within low pressure PN25) consisting of reservoir thermo-sensitive elements and (overheated steam system) consisting of bimetals.

特点:

1、转动的是细精度研磨的不锈钢浮球,抗腐蚀。
2、结构简单,维修方便。
3、不受压力波动的影响,连续排水,噪声小。
4、装有自动排空装置,能够迅速排除空气,防止气堵和汽锁。
5、体积小,排量大。
6、有水就排,能够加快系统启动速度。
024-62657366
Merits

1. The sole moving component is the high-precision grinding stainless float ball, which can resist erosion.
2. Its simple structure is convenient for maintenance.
3. To drain continuously with low noise, without being affected by the fluctuation of the pressure.
4. To be equipped with automatic emptying devices and it can eliminate air quickly and prevent air blocking and steam locking.
5. Small volume and large displacement.
6. To drain whenever there is water left over so as to quicken the startup speed of the system.

主要零件材料/The materials of primary accessories


零部件名称Part and component name

材质Material

阀体、阀盖Valve body、valve cover

铸铁、铸钢、不锈钢Cast iron、Cast steel、Stainless steel

自由浮球Free float ball

304/316不锈钢304/316 Stainless steel

阀座Valve seat

高铬不锈钢High chrome stainless steel

自动排空气装置Automatic air exhaust

不锈钢、热敏元件Stainless steel、Thermo-sensitive element

过滤网、罩Filtrating screen、Cover

不锈钢Stainless steel



不锈钢球直径/Diameter of stainless bal


材质/Material

A,JH3N

B,JH5N

D,JH7N

E,JH9N

F,JH11N

G,JH13N

铸铁 Cast iron

50

68

110

150

180

200

铸钢 Cast steel

50

70

120

150

190

220





工作原理说明:

在设备刚启动时,低温冷凝水和空气同时进入阀腔,这时开启自动排空装置将空气排除,使低温凝结水顺利进入阀腔,阀腔内的凝结水的液位随即上升,使浮球升高,开启阀孔,将凝结水迅速排出 ; 前面的蒸汽很快进入加热设备,使设备迅速加热升温,当蒸汽或较高温度的凝结水进入阀腔时,自动排空装置开始膨胀,关闭自动排空气装置,疏水阀开始正常工作。这时阀腔内的浮球随凝结水液位的高低而升降,能连续的排放凝结水。由于自由浮球式疏水阀的阀座孔总处于凝结水液位以下,形成水封,水汽自然分离,工作时达到无蒸汽泄漏。该阀的小工作压力为0.01Mpa,从0.01Mpa至高工作压力范围内不受温度和工作压力波动的影响,能连续工作,其过冷度约为0℃,由于该阀能自动、连续地排除凝结水,加热设备内不会有水积聚,When the equipment is just started, the low-temperature condensate and air enter the valve cavity at the same time. At this time, open the automatic evacuation device to remove the air, so that the low-temperature condensate can enter the valve cavity smoothly. The liquid level of the condensate in the valve cavity will rise immediately, so that the floating ball will rise. Open the valve hole, so that the condensate can be discharged quickly. The steam in front of the equipment will enter the heating equipment quickly, so that the equipment can be heated quickly and heated up. When the steam or the temperature is lower than When the high temperature condensed water enters the valve chamber, the automatic emptying device starts to expand, the automatic air exhausting device is closed, and the drain valve starts to work normally. At this time, the floating ball in the valve chamber will rise and fall with the level of condensate, which can discharge condensate continuously. Because the valve seat hole of the free floating ball type drain valve is always below the condensate level, forming a water seal, the water vapor is naturally separated, and there is no steam leakage during operation. The minimum working pressure of the valve is 0.01Mpa, from 0.01Mpa to the maximum working pressure range, it is not affected by the fluctuation of temperature and working pressure, and can work continuously. Its minimum supercooling degree is about 0 ℃. Because the valve can automatically and continuously remove the condensate, there is no water accumulation in the heating equipment, which can make the heating equipment achieve the ideal heat exchange efficiency. It is one of the ideal drain valves for heating equipment of production process.

自由浮球式疏水阀 FREE-BALL FLOAT TRAP


沈阳博耐斯疏水阀,自由浮球式疏水阀,圆盘式疏水阀,热动力疏水器,杠杆式疏水阀024-62657366 微信:sy1668